SIMPLEX 2

TECHNICAL SPECIFICATIONS

MACHINES SIMPLEX-2

DESCRIPTION


These machines are composed by a double wall stainless steel furniture, quality AISI-316 and inside, to isolate there is polyurethane, foam between these walls, in order to maintain the temperature. At the front part with 2 doors, made of transparent template glasses to be able the observation of the different trials, without the need to open them. The funnels to feed with liquids each individual drum independently, are placed above. This process can be done without stop the cycle of drums., Also above, there is the control panel to set the drums and resistances, with all the pilot lights and the variable thermostat to choose the desired temperature which is detected by means of a sound in centigrade degrees.

The stainless steel drums are completely smooth, without any other obstacle than the necessary bars, and with a transparent front part in order to be able the observation of the cycle of every bath.


 

TECHNICAL CHARACTERISTICS


  • Three-way 220 or 380 volt current.
  • Motor power 0,125 HP.
  • 2 2 resistances of 650 Watt each one, depending on model.
  • Speed of 34 turns per minute.
  • Resistances regulator.
  • Drum measurements, 300 mm. diameter 150 mm. d'ample