|
BOTTLE SHAKER 8 OR 16 GLASS BOTTLES FOR DYE TESTS
- This machine is incased by a double walled stainless steel
quality AISI-316 and insulated with fibreglass. The lid is fitted
so that when you open it, it locks and this will allow handing of
bottles with both hands.
- The machine with 8 bottles has the control panel on the
right hand side while the machine with 16 bottles has the control
panel in the centre.
- The temperature inside the casing is in degrees centigrade
and is controlled by a heat censor, which is connected to a digital
clock on the panel.
- The actual heating is electric trough alloyed heaters.
- The bottles themselfs are held in place inside the case
by grips which are easily manipulated, these are also made of stainless
steel.
- When the motor is actually switched on the bottles spin
around.
TECHNICAL CHARACTERISTICS
AND MEASUREMENTS:
Three-way
220 or 380 volt current.
Motor power:
1/4 HP.
1 or 2 750
watt elements, depending on model.
Speed: 75
revolutions per minute.
Digital
element regulator.
Size of
receptacles: 110 mm. diameter, 175 mm. length.
|
